Motherboard Fried After a Power Outage [FIXED]

If your motherboard has fried after a power outage, don’t panic! This is a relatively common problem that can often be easily fixed.

First, check to see if your warranty is still valid. If it is, you may be able to get a replacement motherboard from the manufacturer.

If your warranty has expired, or if you’re not covered for this type of issue, you’ll need to purchase a new motherboard. When doing so, be sure to get one that is compatible with your CPU and other hardware.

What to Do with a Fried Motherboard?

If you have fried your motherboard then you need to check if your warranty is still valid. If it isn’t, then you might have to get a new motherboard that would be compatible with your CPU and other hardware. You can get this easily done by taking help from an expert or reading some articles on the internet.

You also need to make sure that all the cables are properly plugged in and that the BIOS settings are correct. Sometimes, resetting the BIOS can also help in getting rid of the problem.

If nothing seems to be working, then you should take your computer to a professional for repairs.

Why Motherboard Gets Fried?

The motherboard is the heart of your computer. It’s what everything else plugged into your computer, including the CPU, memory, and expansion cards connect to. If it gets fried, it’s not a pretty sight.

There are a few reasons why your motherboard may have gotten fried. The most common one is a power surge. This can happen during a lightning storm, or even when you plug your computer into an outlet that isn’t properly grounded. Another possibility is that one of the internal components on your motherboards, such as the CPU, memory, or power supply, has failed.

If your motherboard has been fried, there’s not much you can do to repair it. You’ll need to replace the entire motherboard. This is a fairly extensive repair, and will likely require you to take your computer to a qualified technician.

In the meantime, there are a few things you can do to minimize the damage. First, unplug all of the cables from your computer. This includes the power cord, any USB or Ethernet cables, and any peripheral devices. Next, remove the battery from your laptop, if possible. This will help to prevent any further damage from occurring. Finally, try to avoid using your computer until the repairs have been made.

How to Avoid Motherboard from Frying? Step by Step Guide

So, your motherboard has fried. Whether it was due to a power outage or simply because it was old and faulty, the result is the same – your computer isn’t working. But don’t despair! There are a few things you can do to try and salvage your situation.


First, if possible, remove the motherboard from the computer case. This will help you to avoid any further damage from heat or electricity. Once the motherboard is removed, inspect it for any visible signs of damage. If you see any burnt components, it’s likely that the motherboard is beyond repair.


If, however, the damage isn’t too severe, you may be able to repair the motherboard yourself. Start by checking all of the connections and making sure they’re secure. If any of the capacitors are bulging or leaking, they will need to be replaced. You can find replacement capacitors at most electronics stores.


Once you’ve made all of the necessary repairs, reassemble the computer and try powering it on. If it still doesn’t work, you may need to replace the BIOS chip. This is a more difficult repair, and you’ll likely need to send the motherboard to a professional for this one.

With any luck, following these steps will help you get your computer up and running again. But if not, don’t worry – there are plenty of other options available to you, like buying a new motherboard or even building a new computer from scratch!

How to Save the BIOS from Power Surge?

First, ensure that the AC power to the computer and all peripheral devices are turned off and disconnected.

Next, remove the CMOS battery for about 5-10 minutes. This will reset the BIOS to default settings.

Now, reassemble your PC and reconnect the power. Start your computer and check if it is working properly. If not, then you may have to replace your motherboard.

I hope this guide helped you fix the problem. Do let us know in the comments below if you have any further queries.

Matt Hanson
Matt Hanson is a technology journalist and author at TechRadar. He is also working as an author on TechyDesktop. He loves to write about tech, computers, and PCs.