For all the gamers and content creators out there, if you are facing GPU sag issues and you don’t know how to fix GPU sag, then we have covered you. This is a complete step-by-step guide for you to fix the sag issues.
So let’s say you are using RTX 3080, which is one of the high-performance graphics cards out there in the market. However, the performance of this graphics card is pretty powerful, and it can cause some severe issues like GPU sag. The main reason for the GPU sag is because of the weight of the graphics card. The RTX 3080 is a pretty hefty card, and it can easily bow down your motherboard if not supported properly.
What Actually is a GPU Sag?
But what is actually a GPU sag? Well, it’s a term used to define a drooping or sagging graphic card. The weight of the card can easily cause this, and if not installed properly, it can cause some severe issues like short circuits and even fire due to the hot GPU temperature. So, it’s essential to fix GPU sag as soon as possible.
Is GPU Sag Dangerous?
As you know what a sag actually is so, now, you may be wondering whether it is awful for your PC? The short and simple answer is No. In most cases, a PC has strong build PCIe lanes, which can handle the weight of most GPUs.
But there are some cases where sagging could be dangerous. If you have a very old or cheap motherboard, then the PCIe lanes might not be that strong, and your GPU might actually snap off the lanes, which can cause permanent damage to both your GPU and your motherboard.
So, in short, GPU sag is not dangerous in most cases, but there are some rare exceptions where it could be. If you have a very old or cheap motherboard, you might consider using a GPU support bracket to avoid any potential damage.
How to Fix GPU Sag?
The best way to fix GPU sag is to use a support bracket. A support bracket helps to keep the GPU from sagging and drooping over time. The support bracket also helps to protect the GPU from being damaged if it falls off of the computer case.
So here are the ways that you can use to avoid sag.
PCIe Cable to Support the Card
- The power cable that connects the PSU to GPU is usually a PCIe cable. You can use this very same cable to support the card and avoid GPU sag. All you need is a PCIe cable management bracket which is available in most computer stores.
- This method is pretty straightforward. All you need to do is put the management bracket behind the GPU and connect it using the PCIe cable. Then, screw the bracket in place using the provided screws.
Use Support Tape
If you don’t want to spend money on a support bracket, then you can make your own using support tape. This method is not as reliable as the previous one, but it will still do it.
- To make your own support tape, all you need is strong adhesive tape. The best kind to use is the double-sided mounting tape.
- Cut a piece of the tape that’s big enough to cover the entire back of your GPU. Ensure that the GPU is centered on the tape before you start pressing it down.
- Once the GPU is in place, press down on it firmly so that the tape sticks to the surface.
- Now, all you need to do is peel off the other side of the tape and stick it on the back of your motherboard. Make sure that the GPU is still lined up with the PCI-E slot before you press it down.
- If your GPU has a backplate, you can use the same method to attach the support tape. Just make sure that the backplate is clean and free of any dust before starting.
Use a Support Bracket
If you want a more permanent solution, then you can use a support bracket. This is a metal bracket that attaches to the back of your GPU and provides extra support.
- Support brackets are available for purchase online, and they’re effortless to install. Just make sure that you get the right size for your GPU.
- To install the support bracket, first, remove the backplate from your GPU (if it has one). Then, line up the bracket with the PCI-E slot and press it into place.
- Finally, screw the bracket into place and reattach the backplate (if applicable).
Mount It Vertically
Another solution is to simply mount your GPU vertically. This puts less stress on the PCI-E slot and can help to prevent sag.
- To do this, you’ll need a GPU riser cable. This is a special PCIe extension cable that has a 90-degree connector on one end. Just connect the riser cable to your GPU and then connect it to the PCI-E slot.
- You can buy GPU riser cables online or at some computer stores. Once you have one, just connect it to your GPU and then screw it into place.
- Most GPUs will come with mounting holes on the side or bottom. You can use these holes to screw the GPU into place.
Use a Graphics Card Support
If you don’t want to use a riser cable or mount your GPU vertically, then you can use graphics card support. This is a device that attaches to the back of your GPU and supports it from the bottom.
Graphics card supports are available for purchase online, and they’re not too expensive. You can find them for around $10 or less.
Once you have support, simply attach it to the back of your GPU using the included screws. Make sure that the support is level and flush with the back of the GPU before tightening the screws.
Now your GPU should be properly supported and will no longer sag.
Use a Riser Cable
If you don’t want to purchase a graphics card support, then you can use a riser cable. A riser cable is a PCI Express extension cable that allows you to mount your GPU vertically.
- First, remove the side panel from your computer case to use a riser cable. Then, locate the PCI Express slot on your motherboard that your GPU is plugged into.
- Next, unplug the GPU from the PCI Express slot and plug it into the riser cable. Finally, plug the other end of the riser cable into another PCI Express slot on your motherboard.
- Once you’ve done this, you can close up your computer case, and the riser cable will support your GPU.
So these are all the solutions you can follow to fix your GPU sag. I hope this guide was helpful for you and if you have any doubts, then feel free to ask in the comment section below. GPU sag is a common issue that can occur with any graphics card. It is usually caused by the weight of the card putting pressure on the motherboard or PCIe slot.